Selection and planning

How do you adjust the height of a chair at a beauty bed and desk?

Set the chair first, then the work surface: feet flat, knees at a right angle, hands 25–30 cm above the seat. We show you how to do this with an electric or manual beauty bed and a fixed-height desk, and which height range (40–65 cm) to choose.

Krzesło Noblesse przy biurku do manicure Glam Station

The shortest answer

First adjust the chair to suit you, then adjust the work area to suit the chair. Set the seat at a height that lets your feet rest flat and your knees bend at a right angle; for most people, that's 45–55 cm. The work area (bed or tabletop) should be about 25–30 cm higher than the seat, so your elbows are slightly below your hands and your shoulders are relaxed. With an adjustable bed, adjust the bed; with a fixed desk, adjust the chair.

Most shoulder and neck pain in salons comes down to one thing: the chair is set up for the tabletop instead of the body. The stylist raises the seat to see better and spends all day sitting with dangling feet, or lowers it so their feet can rest flat and raises their shoulders to reach the work area. Below, we show a simple setup sequence that works with any beauty chair, along with measurements for our five models.

What order should you set up your workstation in?

Chair, work area, clearance, accessories. Sit down and adjust the seat for your legs, without looking at the tabletop or bed yet. Only then raise or lower the bed, and with a fixed desk, check that the tabletop is at the right height. Next, check that your knees and the chair base do not collide with the bed base or desk frame, and finally position the lamp and trolley.

This order matters because doing it the other way around leads to compromises: when you adapt to the furniture, you always sacrifice either your feet or your shoulders. The furniture should adapt to you, and where it is fixed, choose a chair with the right adjustment range.

How to position a chair by a beauty bed?

Sit behind the headrest (for lashes or brows) or to the side (for face or body treatments), adjust the seat to your legs, and move in close enough for your knees to fit under the bed. Then raise the bed until the client’s face is level with your elbows. With an electric bed or a hydraulic bed, this takes seconds; with a manual bed, the surface is fixed (usually 65–75 cm), so the chair needs to lower enough, often to 42–48 cm.

Check for two collisions: the chair base against the bed base (with the wide gold frames on Elegance or Prestige models, the wheels stop short) and the chair armrests against the edge of the bed. If you switch sides during the treatment, repeat the test on the other side. Our guide to lash beds explains how to choose a bed for this kind of work.

How do you adjust a chair at a manicure desk?

The tabletop is fixed, so the chair has to do all the work here. With a typical 75 cm tabletop and a work area 25–30 cm above the seat, a comfortable seat height is 45–50 cm; taller people sit at 50–55 cm. Remember the client on the other side, too: their chair should position their hands at the same height, otherwise you’ll be working at an angle throughout the treatment.

The second thing to check is clearance. With a desk with drawers and a dust collector, check whether your thighs fit under the tabletop at your chosen height, and whether the armrests (Serenity is 55 cm wide) keep you from reaching the edge. If they do, don’t lean forward; choose a chair without armrests instead. Read more about workstation layout in our article on how to choose a manicure desk.

Which chair has the required height range?

Required height Compatible models Typical workstation
40–45 cm Serenity (40–54) Low manual bed, eyelashes
45–50 cm Serenity, Essence (45–60), Selle (45–65), Aura (49–63) Manual bed, low desk
50–55 cm All five: Serenity, Essence, Aura, Noblesse (50–63), Selle 75 cm desk, electric bed
55–60 cm Essence, Aura, Noblesse, Selle High desk, saddle stool beside the bed
60–65 cm Aura and Noblesse up to 63, Selle up to 65 Makeup station, working in a semi-standing position

Range isn’t everything: Selle is a backless saddle stool, Serenity has armrests, Noblesse has a reclining backrest, Aura has a wide seat and thick backrest, and Essence has a simple backrest and open sides. We explain which style suits which type of work in our article saddle stool or beauty chair.

How do you check your setup after a week of work?

  • Your feet stay flat throughout the treatment, not on the base’s wheels.
  • Your shoulders are relaxed and your elbows are close to your body.
  • You don’t tilt your head more than slightly; if you do, raise the work surface instead of lowering the chair.
  • You can stand up without pushing the chair back with your hand.
  • After a day of work, one side of your neck doesn’t feel more strained than the other.

If any of these points don’t work, adjust the work surface first, then the chair, and only then your habits. W In our ready-made furniture sets, we match a chair with a range that suits the bed or desk, so you don’t have to worry about this step.

Frequently asked questions

What chair height is best for a 75 cm desk?

Usually 45–55 cm, depending on your height. Start with your feet and knees, not the tabletop.

What chair height is best for lash treatments?

With a manual bed, often 42–48 cm (Serenity). With an adjustable bed, any height works because you can adjust the bed.

Does the client’s manicure chair also need to be adjustable?

It helps because the client’s hands should be at the same height as yours. If the chair is fixed, use a hand rest.

Do tall people need a higher tabletop?

Yes, for people over 180 cm tall, a 75 cm-high tabletop can be too low even with a 63 cm chair. In that case, a beauty bed or desk with a higher top will work better.

See the models in this guide

Browse Beauty chairs